Beko Washer WTL11019W User Manual

WTL95019W  
WTL11019W  
Washing Machine  
Users Manual  
 
TABLE OF CONTENTS  
1 Important instructions for safety and  
environment  
5 Operating the product  
18  
4
5.1 Control panel . . . . . . . . . . . . . . . . . . . . . . .18  
5.2 Preparing the machine . . . . . . . . . . . . . . . .19  
5.3 Main programmes . . . . . . . . . . . . . . . . . . .20  
5.4 Auxiliary function selection . . . . . . . . . . . . .22  
1.1 General safety . . . . . . . . . . . . . . . . . . . . . . .4  
1.2 Intended use . . . . . . . . . . . . . . . . . . . . . . . .5  
1.3 Children's safety. . . . . . . . . . . . . . . . . . . . . .5  
1.4 Package information. . . . . . . . . . . . . . . . . . .6  
1.5 Disposing of the waste product . . . . . . . . . . .6  
1.6 Compliance with WEEE Directive . . . . . . . . . .6  
6 Maintenance and cleaning  
23  
6.1 Cleaning the detergent drawer . . . . . . . . . .23  
6.2 Cleaning the body and control panel . . . . . .23  
6.3 Cleaning the water intake filters . . . . . . . . .23  
6.4 Draining remaining water and cleaning the  
pump filter. . . . . . . . . . . . . . . . . . . . . . . .24  
2 Your washing machine  
7
2.1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . .7  
2.2 Technical specifications . . . . . . . . . . . . . . . .8  
3 Installation  
9
7 Troubleshooting  
25  
3.1 Appropriate installation location. . . . . . . . . . .9  
3.2 Connecting water supply. . . . . . . . . . . . . . . .9  
3.3 Connecting to the drain. . . . . . . . . . . . . . . .10  
3.3.1 Connecting to the drain without pump . . . . . 10  
3.3.2 Connecting to the drain with pump. . . . . . . . 11  
3.4 Adjusting the feet . . . . . . . . . . . . . . . . . . . .11  
3.5 Electrical connection. . . . . . . . . . . . . . . . . .12  
3.6 Connection of inlet hose connector and tap 12  
3.7 Connecting to the water supply. . . . . . . . . .13  
3.8 Using detergent /softener and bleach nector13  
4 Preparation  
14  
4.1 Sorting the laundry. . . . . . . . . . . . . . . . . . .14  
4.2 Preparing laundry for washing. . . . . . . . . . .15  
4.3 Things to be done for energy saving . . . . . .15  
4.4 Correct load capacity . . . . . . . . . . . . . . . . .16  
4.5 Loading the laundry . . . . . . . . . . . . . . . . . .16  
4.6 Using detergent and softener . . . . . . . . . . .16  
4.6.1 Advanced detergent drawer. . . . . . . . . . . . . 17  
4.6.2 Simple detergent drawer . . . . . . . . . . . . . . . 17  
 
3 / EN  
1 Important instructions for safety and environment  
This section contains safety instructions that will help protect from risk of  
personal injury or property damage. Failure to follow these instructions shall  
void any warranty.  
1.1 General safety  
• This product can be used by children at and above 8 years old and by persons  
whose physical, sensory or mental capabilities were not fully developed or  
who lack experience and knowledge provided that they are supervised or  
trained on the safe usage of the product and the risks it brings out. Children  
must not play with the product. Cleaning and maintenance works should not  
be performed by children unless they are supervised by someone.  
• Never place the product on a carpet-covered floor. Otherwise, lack of airflow  
beneath the machine will cause electrical parts to overheat. This will cause  
problems with your product.  
• If the product has a failure, it should not be operated unless it is repaired by  
the Authorized Service Agent. There is the risk of electric shock!  
• This product is designed to resume operating in the event of powering on after  
a power interruption. If you wish to cancel the programme, see "Cancelling  
the programme" section.  
• Connect the product to a grounded outlet protected by a 6 A fuse. Do not  
neglect to have the grounding installation made by a qualified electrician. Our  
company shall not be liable for any damages that will arise when the product  
is used without grounding in accordance with the local regulations.  
• The water supply and draining hoses must be securely fastened and remain  
undamaged. Otherwise, there is the risk of water leakage.  
• Never remove the filter while there is still water in the drum. Otherwise, risk of  
flooding and injury from hot water will occur.  
• Unplug the product when not in use.  
• Never wash the product by spreading or pouring water onto it! There is the  
risk of electric shock!  
• Never touch the plug with wet hands! Never unplug by pulling on the cable,  
always pull out by grabbing the plug.  
• Use detergents, softeners and supplements suitable for automatic washing  
machines only.  
• Follow the instructions on the textile tags and on the detergent package.  
• The product must be unplugged during installation, maintenance, cleaning  
and repairing procedures.  
 
Washing Machine /User’s Manual  
4 / EN  
Important instructions for safety and environment  
• Always have the installation and repairing procedures carried out by the  
Authorized Service Agent. Manufacturer shall not be held liable  
for damages that may arise from procedures carried out by unauthorized  
persons.  
• If the supply cord is damaged, it must be replaced by the manufacturer, its  
service agent or similary qualified persons in order to avoid a hazard.  
• If the power cable is damaged, it must be replaced by the manufacturer,  
after sales service or a similarly qualified person (preferably an electrician) or  
someone designated by the importer in order to avoid possible risks.  
• Place the product on a rigid, flat and level surface.  
• Do not place it on a long-pile rug or similar surfaces.  
• Do not place the product on a high platform or near the edge on a cascaded  
surface.  
• Do not place the product on the power cable.  
• Never use sponge or scrub materials. These will damage the painted, chrome  
plated and plastic surfaces.  
1.2 Intended use  
• This product has been designed for domestic use. It is not suitable for  
commercial use and it must not be used out of its intended use.  
• The product must only be used for washing and rinsing of laundry that are  
marked accordingly.  
• The manufacturer waives any responsibility arisen from incorrect usage or  
transportation.  
• The service life of your product is 10 years. During this period, original spare  
parts will be available to operate the appliance properly.  
1.3 Children's safety  
• Packaging materials are dangerous to children. Keep packaging materials in a  
safe place away from reach of the children.  
• Electrical products are dangerous for the children. Keep children away from  
the product when it is in use. Do not let them to tamper with the product. Use  
child lock to prevent children from intervening with the product.  
• Do not forget to close the lid when leaving the room where the product is  
located.  
• Store all detergents and additives in a safe place away from the reach of  
the children by closing the cover of the detergent container or sealing the  
detergent package.  
 
Washing Machine /User’s Manual  
5 / EN  
Important instructions for safety and environment  
1.4 Package information  
• Packaging materials of the product are manufactured from recyclable  
materials in accordance with our National Environment Regulations. Do  
not dispose of the packaging materials together with the domestic or other  
wastes. Take them to the packaging material collection points designated by  
the local authorities.  
1.5 Disposing of the waste product  
• This product has been manufactured with high quality parts and materials  
which can be reused and are suitable for recycling. Therefore, do not dispose  
the product with normal domestic waste at the end of its service life. Take it  
to a collection point for the recycling of electrical and electronic equipment.  
Please consult your local authorities to learn the nearest collection point. Help  
protect the environment and natural resources by recycling used products. For  
children's safety, cut the power cable and break the locking mechanism of the  
lid so that it will be non-functional before disposing of the product.  
1.6 Compliance with WEEE Directive  
This product complies with EU WEEE Directive (2012/19/EU).  
This product bears a classification symbol for waste electrical  
and electronic equipment (WEEE).  
This product has been manufactured with high quality parts  
and materials which can be reused and are suitable for  
recycling. Do not dispose of the waste product with normal  
domestic and other wastes at the end of its service life. Take  
it to the collection center for the recycling of electrical and  
electronic equipment. Please consult your local authorities to  
learn about these collection centers.  
Compliance with RoHS Directive:  
The product you have purchased complies with EU RoHS Directive (2011/65/  
EU). It does not contain harmful and prohibited materials specified in the  
Directive.  
 
Washing Machine /User’s Manual  
6 / EN  
2 Your washing machine  
2.1 Overview  
1
2
3
4
5
6
7
1- Drain hose  
5- Control panel  
6- Filter cap  
7- Adjustable feet  
2- Loading door  
3- Power cable  
4- Detergent drawer  
 
Washing Machine /User’s Manual  
7 / EN  
Your washing machine  
2.2 Technical specifications  
WTL95019W  
WTL11019W  
Models (EN)  
9.5  
11  
Maximum dry laundry capacity (kg)  
Height (cm)  
99  
60  
99  
60  
Width (cm)  
61.5  
61.5  
Depth (cm)  
42  
42  
Net weight ( 4 kg.)  
Electrical input (V/Hz)  
Total power (W)  
230 V ~/ 50Hz  
490  
230 V~ / 50Hz  
490  
Spin speed (rpm/ min., max.)  
Main model code  
750  
750  
9918  
9918  
Technical specifications may be changed without prior notice to improve the quality of the product.  
Figures in this manual are schematic and may not match the product exactly.  
Values stated on the product labels or in the documentation accompanying it are obtained in laboratory  
conditions in accordance with the relevant standards. Depending on operational and environmental  
conditions of the product, these values may vary.  
 
Washing Machine /User’s Manual  
8 / EN  
3 Installation  
Refer to the nearest Authorised Service Agent for  
installation of the product. To make the product  
ready for use, review the information in the user  
manual and make sure that the electricity, tap  
water supply and water drainage systems are  
appropriate before calling the Authorized Service  
Agent. If they are not, call a qualified technician  
and plumber to have any necessary arrangements  
carried out.  
3.2 Connecting water supply  
The water supply pressure required to run  
the product is between 1 to 10 bars (0.1  
– 1 MPa). It is necessary to have 10 – 80  
liters of water flowing from the fully open  
tap in one minute to have your machine  
run smoothly. Attach a pressure reducing  
valve if water pressure is higher.  
If you are going to use the double water-  
inlet product as a single (cold) water-inlet  
unit, you must install the supplied stopper  
to the hot water valve before operating the  
product. (Applies for the products supplied  
with a blind stopper group.)  
C
C
Preparation of the location and electrical,  
tap water and waste water installations  
at the place of installation is under  
customer's responsibility.  
C
WARNING: Installation and electrical  
connections of the product must be  
WARNING: Models with a single water  
inlet should not be connected to the hot  
A water tap. In such a case the laundry will  
B carried out by the Authorized Service  
Agent. Manufacturer shall not be held  
liable for damages that may arise from  
procedures carried out by unauthorized  
persons.  
get damaged or the product will switch to  
protection mode and will not operate.  
WARNING: Do not use old or used water  
inlet hoses on the new product. It may  
A cause stains on your laundry.  
WARNING: Prior to installation, visually  
check if the product has any defects on  
A it. If so, do not have it installed. Damaged  
1.Connect the special hoses supplied with the  
product to the water inlets on the product. Red  
hose (left) (max. 90 ºC) is for hot water inlet,  
blue hose (right) (max. 25 ºC) is for cold water  
inlet.  
products cause risks for your safety.  
Make sure that the water inlet and  
discharge hoses as well as the power  
cable are not folded, pinched or crushed  
while pushing the product into its place  
after installation or cleaning procedures.  
C
WARNING: Ensure that the cold and  
hot water connections are made correctly  
A when installing the product. Otherwise,  
3.1 Appropriate installation location  
• Place the machine on a rigid floor. Do not place  
it on a long pile rug or similar surfaces.  
• Place the product on a solid and flat floor that  
has sufficient load carrying capacity!  
your laundry will come out hot at the end  
of the washing process and wear out.  
2.Tighten all hose nuts by hand. Never use a tool  
when tightening the nuts.  
3.Open the taps completely after making the  
hose connection to check for water leaks at  
the connection points. If any leaks occur, turn  
off the tap and remove the nut. Retighten the  
nut carefully after checking the seal. To prevent  
water leakages and damages caused by them,  
keep the taps closed when the machine is not  
in use.  
• Do not place the product on the power cable.  
• Do not install the product at places where  
temperature may fall below 0ºC.  
• Place the product at least 1 cm away from the  
edges of other furniture.  
 
Washing Machine /User’s Manual  
9 / EN  
Installation  
3.3 Connecting to the drain  
The end of the drain hose must be directly  
connected to the wastewater drain or to the  
washbasin.  
WARNING: Your house will be flooded  
if the hose comes out of its housing  
during water discharge. Moreover, there  
is risk of scalding due to high washing  
temperatures! To prevent such situations  
and to ensure smooth water intake and  
discharge of the machine, fix the end  
of the discharge hose tightly so that it  
cannot come out.  
 
Washing Machine /User’s Manual  
10 / EN  
Installation  
3.3.2 Connecting to the drain with pump  
The hose should be attached to a height of at  
least 40 cm, and 100 cm at most.  
In case the hose is elevated after laying it on  
the floor level or close to the ground (less than  
40 cm above the ground), water discharge  
becomes more difficult and the laundry may  
come out excessively wet. Therefore, follow the  
heights described in the figure.  
3.4 Adjusting the feet  
The two front feet of washing machine can  
adjust the positive, when the washing machine  
is not level, you can up the front of washing  
machine for a little, then left or right rotation to  
adjustable the feet, make it level.You can check  
the level by the help of the indicator on top  
cover.  
To prevent flowing of dirty water back into the  
machine and to allow for easy discharge, do not  
immerse the hose end into the dirty water or do  
not drive it in the drain more than 15 cm. If it is  
too long, cut it short.  
The end of the hose should not be bent, it  
should not be stepped on and the hose must  
not be pinched between the drain and the  
machine.  
If the length of the hose is too short, use it by  
adding an original extension hose. Length of the  
hose may not be longer than 3.2 m. To avoid  
water leak failures, the connection between  
the extension hose and the drain hose of the  
product must be fitted well with an appropriate  
clamp as not to come off and leak.  
Adjusting foot by checking leveler.  
Remarking : there may be no leveler for some  
types machine.  
 
Washing Machine /User’s Manual  
11 / EN  
Installation  
3.5 Electrical connection  
Connect the product to a grounded outlet  
protected by a 6 A fuse. Our company shall not  
be liable for any damages that will arise when the  
product is used without grounding in accordance  
with the local regulations.  
3.6 Connection of inlet hose  
connector and tap  
1.Tighten all hose nuts by hand. Never use a tool  
when tightening the nuts.  
• Connection must comply with national  
regulations.  
• Power cable plug must be within easy reach  
after installation.  
• If the current value of the fuse or breaker in  
the house is less than 6 Amps, have a qualified  
electrician install a 6 Amp fuse.  
• The voltage specified in the "Technical  
specifications" section must be equal to your  
mains voltage.  
• Do not make connections via extension cables  
or multi-plugs.  
2.Open the taps completely after making the  
hose connection to check for water leaks at  
the connection points. If any leaks occur, turn  
off the tap and remove the nut. Retighten the  
nut carefully after checking the seal. To prevent  
water leakages and damages caused by them,  
keep the taps closed when the machine is not  
in use.  
WARNING: Damaged power cables  
must be replaced by the Authorized  
B Service Agents.  
Transportation of the product  
1. Unplug the product before transporting it.  
2. Remove water drain and water supply  
connections.  
3. Drain all water that has remained in the  
product.  
4. Install all styrofoams and then pcakage the  
machine.  
WARNING: Packaging materials are  
dangerous to children. Keep packaging  
A materials in a safe place away from  
reach of the children.  
 
Washing Machine /User’s Manual  
12 / EN  
Installation  
3.7 Connecting to the water supply  
Important:  
The water supply pressure required to run the  
machine must be 1-10 bar (0,1 – 1 MPa).  
Connect the special hoses supplied with the  
machine to the water intake valves on the  
machine.  
Connect the special hoses supplied with the  
product left)( to the water inlets on the product.  
Redhosemax.60( ºC )right( blue hose ,is for hot  
water inlet )max.25(ºCis for cold water inlet. )  
3.8 Using detergent /softener  
and bleach nector  
When using detergent, softener, starch, fabric dye,  
bleachor limescale remover read the anufacturer’s  
instructionson the package carefully and follow  
the suggested dosagevalues. Use measuring cup  
if available.  
1
2
Type1:  
1.for laundry detergent  
2.for softener  
3.for bleach  
3
Type1  
1
Type2:  
1.for laundry detergent  
2.for bleach  
2
Type2  
If you are going to use your double water-inlet  
machine as a single (cold) water-inletunit, you  
must install the stopper*, supplied with your  
machine to the hot water valve.  
If you want to use both water inlets of the  
product, you can connect the hot water hose  
after removing the stopper and gasket group  
from the hot water valve.  
Type3:  
1.putting laundry  
detergent into drum  
directly  
1
2
Type3  
2.for bleach  
Applies for the products supplied with a blind  
stopper group.  
Models with a single water inlet should not be  
connected to the hot water tap.  
When returning the appliance to its place after  
maintenance or cleaning, care should be taken  
not to fold, squeeze or block the hoses.  
 
Washing Machine /User’s Manual  
13 / EN  
4 Preparation  
4.1 Sorting the laundry  
• Sort laundry according to type of fabric, colour, and degree of soiling and allowable water  
temperature.  
• Always obey the instructions given on the garment tags.  
LAUNDRY WASH SYMBOLS  
Machine  
Wash  
Symbols  
WASH  
950C  
700C  
600C  
500C 400C  
300C  
Maximum  
Symbol(s)  
Water  
Temperatures  
  
  
  
   
  
  
  
  
Drying  
Symbols  
Suitable for  
dryer  
No Iron  
Do not dry-  
clean  
Sensitive /  
Delicate dry  
Do not dry  
with dryer  
Do not dry  
DRYING  
Drying  
Settings  
Iron -  
Iron at high  
temperature  
Iron at medium  
temperature  
Iron at low  
temperature  
Dry or Steam  
IRON  
200 0C  
150 0C  
110 0C  
Maximum temperature  
Bleach (sodium  
hypochlorite)  
can be used  
Bleach is not  
allowed  
Only bleaches without  
chlorine are allowed  
All bleaches are allowed  
BLEACH  
 
Washing Machine /User’s Manual  
14 / EN  
Preparation  
4.2 Preparing laundry for washing  
• Laundry items with metal attachments such as,  
underwired bras, belt buckles or metal buttons  
will damage the machine. Remove the metal  
pieces or wash the clothes by putting them in a  
laundry bag or pillow case.  
• Take out all substances in the pockets such as  
coins, pens and paper clips, and turn pockets  
inside out and brush. Such objects may damage  
the product or cause noise problem.  
• Put small size clothes such as infant's socks  
and nylon stockings in a laundry bag or pillow  
case.  
• Place curtains in without compressing them.  
Remove curtain attachment items.  
• Fasten zippers, sew loose buttons and mend  
rips and tears.  
• Wash “machine washable” or “hand washable”  
labeled products only with an appropriate  
programme.  
4.3 Things to be done  
for energy saving  
Following information will help you use the  
product in an ecological and energy-efficient  
manner.  
• Operate the product in the highest capacity  
allowed by the programme you have selected,  
but do not overload; see, "Programme and  
consumption table".  
• Always follow the instructions on the detergent  
packaging.  
• Wash slightly soiled laundry at warm or cold  
water..  
• Use faster programmes for small quantities of  
lightly soiled laundry.  
• Do not use soaking and hot water for laundry  
that is not heavily soiled or stained.  
• If you plan to dry your laundry in a dryer, select  
the longer spin time recommended during  
washing process.  
• Do not wash colours and whites together. New,  
dark coloured cottons release a lot of dye. Wash  
them separately.  
• Do not use detergent in excess of the amount  
recommended on the detergent package.  
• Tough stains must be treated properly before  
washing. If unsure, check with a dry cleaner.  
• Use only dyes/colour changers and limescale  
removers suitable for machine wash. Always  
follow the instructions on the package.  
• Wash trousers and delicate laundry turned  
inside out.  
• Keep laundry items made of Angora wool in the  
freezer for a few hours before washing. This will  
reduce pilling.  
• Laundry that are subjected to materials such as  
flour, lime dust, milk powder, etc. intensely must  
be shaken off before placing into the machine.  
Such dusts and powders on the laundry may  
build up on the inner parts of the machine in  
time and can cause damage.  
 
Washing Machine /User’s Manual  
15 / EN  
Preparation  
4.4 Correct load capacity  
The maximum load capacity depends on the type  
of laundry, the degree of soiling and the washing  
programme desired.  
The machine automatically adjusts the amount  
of water according to the weight of the loaded  
laundry.  
4.6 Using detergent and softener  
Detergent, softener and other cleaning agents  
• Add detergent and softener before starting the  
washing programme.  
• Never leave the detergent drawer open while  
the washing programme is running!  
• Place the detergent bag or the dispensing ball  
directly among the laundry in the machine if  
you use them.  
WARNING: Follow the information in the  
“Programme and consumption table”.  
A When overloaded, machine's washing  
Choosing the detergent type  
The type of detergent to be used depends on the  
type and colour of the fabric.  
• Use different detergents for coloured and white  
laundry.  
• Wash your delicate clothes only with special  
detergents (liquid detergent, wool shampoo,  
etc.) used solely for delicate clothes.  
• Wash woolens with special detergent made  
specifically for woolens.  
performance will drop. Moreover, noise  
and vibration problems may occur.  
Laundry type  
Bathrobe  
Napkin  
Weight (g)  
1200  
100  
Duvet cover  
Bed Sheet  
Pillowcase  
Tablecloth  
Towel  
700  
500  
200  
250  
WARNING: Use only detergents  
manufactured specifically for washing  
A machines.  
200  
Hand towel  
Evening gown  
Underclothing  
Men’s overalls  
Men’s shirt  
Men’s pajamas  
Blouses  
100  
200  
100  
600  
200  
500  
100  
WARNING: Do not use soap powder.  
Adjusting detergent amount  
The amount of washing detergent to be used  
depends on the amount of laundry, the degree of  
soiling and water hardness.  
4.5 Loading the laundry  
• Pour the detergent into the main wash  
compartment of the detergent drawer. If your  
machine is without detergent drawer, pour the  
detergentdirectlyoverthelaundryinthetub.  
• Do not use amounts exceeding the dosage  
quantities recommended on the detergent  
package to avoid problems of excessive foam,  
poor rinsing, financial savings and finally,  
environmental protection.  
1.Open the lid.  
2.Place laundry items loosely into the machine.  
3.Close the lid and; Ensure all loads inside well  
distributed.  
WARNING: In case of misplacing the  
laundry, noise and vibration problems may  
A occur in the machine.  
• Use less detergent for small amounts or lightly  
soiled clothes.  
 
Washing Machine /User’s Manual  
16 / EN  
Preparation  
Using softeners  
Pour the softener into the softener compartment  
of the detergent drawer. If your machine is without  
Using bleaches  
Add the bleaching agent to the dedicated  
compartment on the top cover.  
detergent drawer or with simple detergent drawer • Do not use bleaching agent and detergent by  
(detergent drawer that does not include softener  
department) softener can be put at the dedicated  
compartment on the balance ring.  
• Do not exceed the (>max<) level marking in the  
softener compartment.  
• If the softener has lost its fluidity, dilute it with  
water before putting it in the detergent drawer.  
mixing them.  
• Use just a little amount of bleaching agent  
and rinse the clothes very well as it causes  
skin irritation. Do not pour the bleaching agent  
onto the clothes and do not use it for coloured  
clothes.  
4.6.1 Advanced detergent drawer  
The detergent drawer is composed of three  
compartments:  
– (1) for main wash  
– (2) for softener  
Using liquid detergent  
• Liquid detergent stains your clothes when used  
with Delayed Start function. If you are going to  
use the Delayed Start function, do not use liquid  
detergent.  
– (*) in addition, there is siphon piece in the  
softener compartment.  
Using gel and tablet detergent  
Apply the following instructions when using tablet,  
gel and similar detergents.  
(*)  
• If the gel detergent thickness is fluidal, put the  
gel detergent into the main wash detergent  
compartment during first water intake.  
• If the gel detergent thickness is not fluidal or in  
the shape of capsule liquid tablet, put it directly  
into the drum before washing.  
(1)  
(2)  
• Put tablet detergents into the main wash  
compartment or directly into the drum before  
washing.  
4.6.2 Simple detergent drawer  
Tablet detergents may leave residues  
in the detergent compartment. If you  
encounter such a case, place the tablet  
detergent between the laundry, close to the  
lower part of the drum in future washings.  
This detergent drawer has one compartment  
– (1) for main wash  
(1)  
Using starch  
• Add liquid starch, powder starch or the fabric  
dye into the softener compartment.  
• Do not use softener and starch together in a  
washing cycle.  
Wipe the inside of the machine with a damp  
and clean cloth after using starch.  
 
Washing Machine /User’s Manual  
17 / EN  
5 Operating the product  
5.1 Control panel  
9
1
2
8
7
6
5
4
3
1 - On / Off button  
2 - Start / Pause button  
3 - Air Turbo button  
4 - Auxiliary Function button  
5 - Water Level button  
6 - Delayed Start Time button  
7 - Water Supply button  
8 - Function button  
9 - Remaining Time / Delay Start Time / Error Display  
 
Washing Machine /User’s Manual  
18 / EN  
Operating the product  
5.2 Preparing the machine  
• Remaining Time, Delay Start Time, Error  
Display  
Figures in this manual are schematic and  
may not match the product exactly.  
Displays the remaining  
wash time. Displays the  
reserved delay start time.  
Displays the error state if  
a problem occurs in the  
washing machine so that  
you can take action.  
C
• Power Button  
Press this button once to  
operate. Press it again to  
turn the power off.  
• Delay Start Time Button  
• Start/Pause Button  
Use to pause and restart  
Adjusts delay start time.  
max. 18 h  
the operation. To change  
the washing procedure  
during an operation,  
press this button to stop,  
and again to restart after  
changing the procedure.  
• Water Level Button  
The water level is  
automatically adjusted.  
However, you can select  
the water level manually  
by pressing this button.  
The water level button  
only can be active during  
standby status, water level  
can be changed before  
start to running; and you  
can press the start/pause  
button then change water  
level while machine is  
running, press start/pause  
again back to work after  
finish water level setting.  
Displays selected  
• Program Select Button  
Each time the button is  
pressed, the washing  
program changes.  
• Water Supply Button (OPTION)  
Each time this button is  
pressed, the type of water  
is selected as follows,  
Cold / Hot / Warm  
Cold: No light  
Warm: Red light  
Hot: Flashin red light  
program’s default water  
level.  
Low / Few / Medium /  
High  
 
Washing Machine /User’s Manual  
19 / EN  
Operating the product  
5.3 Main programmes  
• Function Button  
Depending on the type of fabric, use the following  
main programmes.  
With every press of this  
button, the function  
changes.  
Figures in this manual are schematic and  
may not match the product exactly.  
C
• Fuzzy  
This programme selects the best water level  
and wash course automatically depending on  
the amount of laundry. Use this programme for  
washing cotton and blended items.  
• Air Turbo Button  
Press this button to speed  
dry your laundry.  
This function can only be  
selected if a spin cycle  
is set.  
The air Turbo button only  
can be active during  
standby status, this  
function can be changed  
before start to running;  
and you can press  
the start/pause button  
then change time while  
machine is running, press  
start/pause again back  
to work after finish water  
level setting.  
• Blanket  
This programme is suitable for washing bulky  
laundry items such as blankets and bed sheets.  
Fold the bulky items in a suitable manner  
before placing in the wash basket. Loading  
recommendation: max 1/2 of the full capacity.  
• Child Lock  
This is a device to protect  
children from being  
accidentally hurt while  
playing with the washer.  
• Eco  
This programme is suitable for washing less  
amount (e.g. max 1/3 of the full capacity) of  
lightly/daily soiled laundry in short time using  
minimum amount of water.  
How to start the Child-Lock function:  
- Press the “Water level” button and ‘’Function’  
button at the same time for 3 sec.  
- If Child Lock function is activated, ‘’CL’’ will be  
written in the display for 3 sec.  
To release the function of Child-Lock: In case  
the “Child-Lock” is programmed, press both  
the “Water level” and “Function” buttons at the  
same time.  
 
Washing Machine /User’s Manual  
20 / EN  
Operating the product  
• Tub Clean  
• Light  
Use this programme on a regular basis (e.g. once  
in a month) to sanitize and clean your machine  
and to prevent unwanted odours. Do not place  
any items or laundry in the machine when you  
use this programme, it must be operated when  
the washer is empty otherwise laundry or washer  
might be damaged. You can add a special  
purpose detergent suitable for cleaning machines.  
High water and 3 min air turbo options are set  
automatically in this wash course.  
This programme is suitable for washing up to a  
full capacity of lightly/daily soiled durable cotton  
and blended clothes.  
• Heavy  
This programme is suitable for washing up to a  
full capacity of heavily soiled durable cotton and  
blended clothes. Soaking and hot water functions  
are set automatically in this wash course.  
• Wool  
Use this programme for washing machine  
washable delicate (cotton, blended and wool)  
items such as sweaters, jumpers and cardigans.  
Hot water and soaking options can not be selected  
in this wash course. It is recommended to use  
special purpose detergents suitable for washing  
delicate laundry. Loading recommendation: max  
1/3 of the full capacity.  
• Favorite  
This is a memory programme. You can select one  
of the defined programme as your favorite. To  
store the selected programme as your favorite,  
just press water level and delayed start time  
buttons at the same time for 3 seconds at the  
selected programme. During this storage, led  
of selected programme will be continuously on  
and led of favorite programme will be flashing.  
When you select the favorite programme, both  
of the LEDs (favorite programme and stored  
programme) will be on till you press start button.  
After you press start button, only LED of favorite  
• Standard  
This programme is suitable for washing up to a  
full capacity of normally soiled durable cotton and programme will be on. And when you choose  
blended clothes.  
favorite programme, machine will run according to  
the stored programme.  
 
Washing Machine /User’s Manual  
21 / EN  
Operating the product  
5.4 Auxiliary function selection  
Figures in this manual are schematic and  
may not match the product exactly.  
C
• Wash  
• Soaking  
Select this function if you like to wash your  
laundry by soaking. Soaking is recommended for  
heavily soiled laundry items. You can add your  
normal amount of detergent and start the wash  
programme by selecting this function. Soaking is  
not selectable in Eco, Fuzzy, Tub clean and Wool  
programmes.  
• Rinse  
Use this programme when you want to rinse or  
starch separately.  
• Spin  
Use this programme to apply an additional spin  
cycle for your laundry or to drain the water in the  
machine.  
 
Washing Machine /User’s Manual  
22 / EN  
Operating the product  
5.5 Programme and consumption table  
45  
45  
6
6
5
45  
45  
27  
27  
5
76  
76  
76  
6
6
6
6
76  
38  
38  
6
6
38  
38  
43  
43  
43  
6
6
43  
42  
25  
6
6
6
6
25  
25  
25  
: Selectable  
* : Automa cally selected, no canceling.  
Auxiliary func ons  
So:Soaking  
R:Rinse  
W:Wash  
Sp:Spin  
The auxiliary functions in the table may vary according to the model of your machine.  
Water and power consumption may vary subject to the changes in water pressure, water hardness and temperature, ambient  
temperature, type and amount of laundry, selection of auxiliary functions and spin speed, and changes in electric voltage.  
You can see the washing time of the programme you have selected on the display of the machine. It is normal that small  
differences may occur between the time shown on the display and the real washing time.  
 
Washing Machine /User’s Manual  
23 / EN  
6 Maintenance and cleaning  
Service life of the product extends and frequently  
faced problems decrease if cleaned at regular  
intervals.  
6.2 Cleaning the body  
and control panel  
Wipe the body of the machine with soapy water or  
non-corrosive mild gel detergents as necessary,  
and dry with a soft cloth.  
Use only a soft and damp cloth to clean the  
control panel.  
6.1 Cleaning the detergent drawer  
Clean the detergent drawer at regular intervals  
(every 4-5 washing cycles) as shown below  
in order to prevent accumulation of powder  
detergent in time.  
6.3 Cleaning the water intake filters  
There is a filter at the end of each water intake  
valve at the rear of the machine and also at the  
end of each water intake hose where they are  
connected to the tap. These filters prevent foreign  
substances and dirt in the water to enter the  
washing machine. Filters should be cleaned as  
they do get dirty.  
1.Close the taps.  
2.Remove the nuts of the water intake hoses to  
access the filters on the water intake valves.  
Clean them with an appropriate brush. If the  
filters are too dirty, take them out by means of  
pliers and clean them.  
3.Take out the filters on the flat ends of the water  
intake hoses together with the gaskets and  
clean thoroughly under running water.  
4.Replace the gaskets and filters carefully in their  
places and tighten the hose nuts by hand.  
1.Detergent drawer is closed.  
2. Pulling detergent drawer to the front side.  
3. Turning detergent drawer to upper side,  
and taking drawer out.  
Cleaning detergent drawer by water.  
 
Washing Machine /User’s Manual  
24 / EN  
Maintenance and cleaning  
b. Loosen pump filter (anticlockwise) until water  
starts to flow. Fill the flowing water into the  
container you have placed in front of the filter.  
Always keep a piece of cloth handy to absorb  
any spilled water.  
c. When the water inside the machine is finished,  
take out the filter completely by turning it.  
4. Clean any residues inside the filter as well as  
fibers, if any, around the pump impeller region.  
5. Install the filter.  
6.4 Draining remaining water  
and cleaning the pump filter  
The filter system in your machine prevents solid  
items such as buttons, coins and fabric fibers  
clogging the pump impeller during discharge of  
washing water. Thus, the water will be discharged  
without any problem and the service life of the  
pump will extend.  
If the machine fails to drain water, the pump filter  
is clogged. Filter must be cleaned whenever it  
is clogged or in every 3 months. Water must be  
drained off first to clean the pump filter.  
In addition, prior to transporting the machine  
(e.g., when moving to another house) and in case  
of freezing of the water, water may have to be  
drained completely.  
6.5 Cleaning the fuzz collector  
1. Push to take the filter out.  
WARNING: Foreign substances left  
in the pump filter may damage your  
machine or may cause noise problem.  
In order to clean the dirty filter and discharge  
the water:  
1. Unplug the machine to cut off the supply power.  
2. Open the filter cap.  
Press the tab on the filter cap to the left side  
and pull the cover out towards yourself.  
2.Make the edge a litter deformed, then take the  
filter net out.  
3. After cleaning assemble the filter on right position.  
a. Place a large container in front of the filter to  
catch water from the filter.  
Washing Machine /User’s Manual  
25 / EN  
 
7 Troubleshooting  
Problem  
Check & Solution  
- Is the electric voltage normal?  
The power is cut off.  
Water does not drain.  
- Is the washer plugged in? Plug in the electric cord.  
- Is the drain hose down? Put the drain hose down.  
- Is the drain hose folded? Unfold the drain hose.  
- Is the drain hose outlet clogged? Remove the waste cleanly.  
- Is the washer lid open? Close the lid.  
- Is the Pause button on? Press the Start/Pause button one more time and check if the  
washer starts.  
Washing machine  
won’t work.  
- Is enough water filled to the water level?  
- If the water pressure is low, it takes a long time to start washing.  
- Is the tap closed? Open the tap to supply water.  
If the drain hose,  
water tap and  
drum are frozen,  
do as follows.  
- Add hot water to the frozen water tap and remove the drain hose. Soak into hot water.  
- Pour hot water into the drum for about 10 minutes.  
- Put a hot water towel on the drain hose connector.  
- If the drain hose defrosts, connect again and check for proper water draining.  
The water does not  
drain out  
immediately.  
- The drain is clogged with coins or pins. The drain hose is hung over the drain hose  
hook.  
- Half fill the drum with water and try for spinning again.  
- If the connecting part is loose, water may leak. Repeat the assembling steps again.  
(Refer to “Connection of inlet hose connector and tap” and “Connecting to the water  
supply”)  
The water leaks at  
the water supply  
hose connector.  
- Is the water supply hose folded? Unfold the hose.  
- If the water supply is too strong, water may leak. Close the tap a little.  
- Is water leaking from the tap itself? Fix the tap.  
- Did you press the Start/Pause button after selecting the water supply?  
If the Start/Pause button is not pressed, water is not supplied. Press the Start/Pause -  
button.  
- Is the tap closed? Turn on the tap.  
Water is not supplied  
- Is the filter net at the water supply hose connector clogged with dirty matters? Clean  
the filter net by brushing with a toothbrush.  
- Is the water supply cut off? If the water supply is suspended, turn off the tap and power  
off.  
- Check if the laundry is spread evenly in the washer. Spread out the laundry evenly and  
start again.  
Spinning makes loud  
noises and vibrations.  
- Check if the washing machine levels on a sturdy flat floor. Set the machine at level.  
Adjust the feet for leveling.  
- Is around the washing machine filled with unnecessary stuffs? Remove those  
unnecessary things away from the wash machine.  
WARNING: If you cannot eliminate the problem although you follow the instructions in this section,  
consult your dealer or the Authorized Service Agent. Never try to repair a nonfunctional product  
yourself.  
 
Washing Machine /User’s Manual  
26 / EN  
Troubleshooting  
Error  
Message  
Error  
Control  
- Is the water tap shut off?  
- Is the water supply cut off ?  
- Is the water supply hose punctured ?  
- Is the tap or water supply hose frozen ?  
- Is the water pressure low or is the filter of the inlet valve  
clogged with impurities?  
- Is the Hot hose connected to cold?  
- Is the Cold hose connected to hot?  
E1  
Water intake over time  
- Is the drain hose positioned correctly?  
- Is the drain hose bent or placed too high?  
- Is the internal part of the hose or drain pump (only pump  
model) clogged with impurities?  
E2  
Water pumping over time  
- Is the laundry evenly balanced?  
E3  
E4  
E5  
E6  
Unbalance  
- Is the washing machine placed on a flat surface?  
- Please call your nearest service center for help.  
- Please call your nearest service center for help.  
- Is the lid closed?  
Over flow  
Frequency out of range  
Door open  
WARNING: If you cannot eliminate the problem although you follow the instructions in this section,  
consult your dealer or the Authorized Service Agent. Never try to repair a nonfunctional product  
yourself.  
 
Washing Machine /User’s Manual  
27 / EN  
 

Belkin Network Router F7D7302 User Manual
Blaupunkt Car Stereo System CD51 User Manual
Boss Audio Systems Music Pedal Boss RV 5 User Manual
Bostitch Label Maker ST 1150 User Manual
Briggs Stratton Portable Generator 030210 2 User Manual
Brother Fax Machine FAX 202 User Manual
Canon All in One Printer 3745B002 User Manual
Canon Camera Flash 2805B002 User Manual
Castelle Switch Office Connect User Manual
Cino Printer MP3200 User Manual