Brother Printer PJ 622 User Manual

SAFETY AND LEGAL  
PJ-622/PJ-623/  
PJ-662/PJ-663  
Mobile Printer  
Be sure to read this document before using the  
printer.  
US ENG  
 
To use the machine safely  
If the printer malfunctions, immediately stop using it, and then contact the sales representative  
where the printer was purchased.  
Symbols used in this document  
The following symbols are used throughout this document.  
Indicates an imminently hazardous situation which, if the product is handled  
without following the warnings and instructions, will result in death or serious  
injuries.  
DANGER  
Indicates a potentially hazardous situation which, if the product is handled  
without following the warnings and instructions, could result in death or serious  
injuries.  
WARNING  
Indicates a potentially hazardous situation which, if the product is handled  
without following warnings and instructions, may result in minor or moderate  
injuries, and/or property damage.  
CAUTION  
Indicates risk of fire under certain circumstances  
Indicates risk of electric shock under certain circumstances  
Indicates risk of burns under certain circumstances  
Indicates an action that must not be performed  
Indicates risk of combustion if fire is nearby  
Indicates risk of injury if the indicated part of the printer is touched  
Indicates risk of injury, such as electric shock, if the indicated part of the printer is disassembled  
Indicates risk of electric shock if the operation is performed with wet hands  
Indicates risk of electric shock if the printer is exposed to water  
Indicates an action that must be performed  
Indicates that the AC power cord must be disconnected from the electrical outlet  
2
 
Important safety instructions  
DANGER  
Rechargeable Ni-MH Battery  
Carefully observe the following precautions for the optional rechargeable Ni-MH battery (hereafter,  
referred to as “rechargeable battery”), otherwise heat or cracks may be produced, or explosion,  
smoke, fire, electric shock, or damage may result.  
To charge the rechargeable battery, insert the rechargeable battery into the PocketJet  
PJ-622/PJ-623/PJ-662/PJ-663, and then use the AC adapter/DC cable designed specifically for  
this printer.  
Do not insert or use the rechargeable battery in any equipment other than the PocketJet  
PJ-622/PJ-623/PJ-662/PJ-663. Do not directly connect it to a power supply, car cigarette lighter  
or electrical outlet. Do not expose the rechargeable battery or the printer with the rechargeable  
battery installed to pressure, heat, or an electric charge (such as an oven or microwave oven,  
clothes dryer, high-voltage equipment or electromagnetic cooker).  
Do not place the rechargeable battery or the printer with the rechargeable battery installed near  
a fire or in a location exposed to heat or high temperatures (such as near a flame or stove, in  
the sun, or in a hot car).  
Do not place the rechargeable battery or the printer with the rechargeable battery installed near  
water or seawater. In addition, do not drop them in water or allow them to get wet.  
Do not short-circuit the terminals of the rechargeable battery or the printer with the rechargeable  
battery installed, such as with a metal object.  
Do not pierce or poke a hole in the rechargeable battery or the printer with the rechargeable  
battery installed with a sharp object, such as a nail.  
Do not hit with a hammer, step on, throw, drop or apply a strong shock to the rechargeable  
battery or the printer with the rechargeable battery installed.  
Do not disassemble or alter the rechargeable battery or the printer with the rechargeable battery  
installed.  
Do not use a damaged or deformed rechargeable battery.  
Do not use in a corrosive environment (such as an area exposed to salty air, salt water, or acidic,  
alkaline or corrosive gas).  
Liquid (electrolyte) leaking from the printer or rechargeable battery may indicate that the  
rechargeable battery is damaged. If the rechargeable battery leaks, immediately move the  
printer or rechargeable battery away from flames.  
Do not touch the electrolyte. If electrolyte gets in the eyes, do not rub the eyes. Immediately  
rinse liberally with tap water or other clean water and seek the advice of a medical professional.  
If left alone, the electrolyte could cause eye damage. If the liquid contacts your skin or clothing,  
immediately rinse them with water. Place the printer in a bag to isolate it.  
Do not put the rechargeable battery, or a printer with the rechargeable battery installed, into a  
microwave oven or a high pressure container.  
3
 
DANGER  
Rechargeable Li-ion Battery  
Carefully observe the following precautions for the optional rechargeable Li-ion battery (hereafter,  
referred to as “rechargeable battery”), otherwise heat or cracks may be produced, or leaking,  
electrical short, explosion, smoke, fire, electric shock, or damage may result.  
To charge the rechargeable battery, insert the rechargeable battery into the PocketJet  
PJ-622/PJ-623/PJ-662/PJ-663, and then use the AC adapter/DC cable designed specifically for  
this printer.  
Do not disassemble or modify the rechargeable battery. The safety mechanisms and protection  
circuitry within the rechargeable battery could become disabled.  
Do not allow wires or other metal objects to come into contact with the terminals of the  
rechargeable battery. Do not carry or store with metal objects such as necklaces or hairpins.  
This could cause an electrical short, and could cause metal objects such as wires, necklaces,  
or hairpins to overheat.  
Do not dispose of the rechargeable battery in fire or intentionally overheat. This could cause the  
internal insulation to melt, gas to be emitted, or safety mechanisms to fail. Additionally, the  
electrolyte could catch fire.  
Do not use or leave the rechargeable battery near fire, heaters, or other high temperature  
(above 80C) locations.  
Do not allow the rechargeable battery to come into contact with or to be immersed in regular or  
salt water. The safety mechanisms and protection circuitry within the rechargeable battery could  
become disabled.  
Do not charge the rechargeable battery near a fire or in direct sunlight. This could cause the  
protection circuitry which is designed to prevent danger due to high heat to activate, causing  
either charging to stop, charging to occur under excessive current/voltage due to failure of the  
protection circuitry, or abnormal chemical reaction within the rechargeable battery.  
Only charge the rechargeable battery using the AC adapter/DC cable designed specifically for  
this printer or in accordance with the specified charging parameters. Charging outside these  
parameters (charging at higher than the recommended temperature, higher than the  
recommended current/voltage, using a modified adapter, etc.) could overcharge the  
rechargeable battery, charge the rechargeable battery at an abnormal current/voltage, or cause  
an abnormal chemical reaction within the rechargeable battery.  
Do not pierce the rechargeable battery with a nail, hit with a hammer, or step on the  
rechargeable battery.  
Do not subject the rechargeable battery to severe shocks or throw the rechargeable battery.  
Damage to the rechargeable battery’s protection circuitry could cause the rechargeable battery  
to be recharged at an abnormal current/voltage, or cause an abnormal chemical reaction within  
the rechargeable battery.  
Do not use the rechargeable battery if it is severely damaged or deformed.  
Do not directly solder any connections to the rechargeable battery. This could cause internal  
insulation to melt, gas to be emitted, or safety mechanisms to fail.  
Do not use the rechargeable battery with the polarity (+) (-) reversed. Check the orientation of  
the rechargeable battery before inserting it, and do not try to force the rechargeable battery into  
the printer. Charging the rechargeable battery with the polarity reversed could cause an  
abnormal chemical reaction within the rechargeable battery or abnormal current flow during  
discharge.  
Do not directly connect the rechargeable battery to a household or vehicle cigarette lighter  
socket.  
4
 
DANGER  
Use the rechargeable battery only with approved devices. Use with other devices may result in  
lower battery performance or battery life.  
Liquid (electrolyte) leaking from the printer or rechargeable battery may indicate that the  
rechargeable battery is damaged. If the rechargeable battery leaks, immediately move the  
printer or rechargeable battery away from flames.  
Do not touch the electrolyte. If electrolyte gets in the eyes, do not rub the eyes. Immediately  
rinse liberally with tap water or other clean water and seek the advice of a medical professional.  
If left alone, the electrolyte could cause eye damage. If the liquid contacts your skin or clothing,  
immediately rinse them with water. Place the printer in a bag to isolate it.  
Do not put the rechargeable battery, or a printer with the rechargeable battery installed, into a  
microwave oven or a high pressure container.  
WARNING  
Printer  
Do not use the printer where its use is prohibited, such as on an airplane. This could affect  
equipment, resulting in an accident.  
Do not use the printer in special environments, such as near medical equipment. Electromagnetic  
waves may cause the equipment to malfunction.  
Do not insert foreign objects into the printer or its connectors and ports, otherwise fire, electric  
shock, or damage may result.  
If foreign objects are dropped into the printer, immediately turn it off, disconnect the AC  
adapter/DC cable from the electrical outlet, and then contact the sales representative where the  
printer was purchased. If you continue to operate the printer, fire, electric shock, or damage may  
result.  
Do not operate, charge, or store the printer in the following locations, otherwise leaking, fire, electric  
shock, or damage may result.  
Near water, such as in a bathroom or near a water heater, or in an extremely humid location  
In a location where it is exposed to rain or moisture  
In an extremely dusty location  
In an extremely hot location, such as near naked flames, heaters, or in direct sunlight  
In a closed car under a hot sun  
In a location where condensation may form  
If you see lightning nearby, disconnect the AC adapter/DC cable from the electrical outlet. If  
lightning strikes nearby, do not touch the printer, since there is a risk of electric shock.  
Do not try to disassemble or alter the printer, otherwise fire, electric shock, or damage may result.  
For servicing, adjustments or repairs, contact the sales representative where the printer was  
purchased. (The warranty does not cover repairs for damage resulting from disassembly or  
alterations performed by the user.)  
5
 
WARNING  
The printer may be damaged if it is dropped or subjected to strong shocks, such as being stepped  
on. If you continue to operate a damaged printer, fire or electric shock may result. If the printer is  
damaged, immediately turn it off, disconnect the AC adapter/DC cable from the electrical outlet, and  
then contact the sales representative where the printer was purchased.  
If the printer operates abnormally (for example, if it produces smoke, an unusual odor, or noise),  
stop using it, otherwise fire, electric shock, or damage may result. Immediately turn off the printer,  
disconnect the AC adapter/DC cable from the electrical outlet, and then contact the sales  
representative where the printer was purchased for repairs.  
Do not charge the printer with an AC adapter/DC cable other than that specified.  
If the printer is not fully charged after the specified amount of time has passed, stop charging it,  
otherwise fire, electric shock, or damage may result.  
Do not place the product near chemicals or in a place where chemical spillage could occur. In  
particular organic solvents or liquids may cause the casing and/or cables to melt or dissolve, risking  
fire or electric shock. They may also cause the product to malfunction or become discolored.  
AC adapter/DC cable  
Only use the AC adapter/DC cable designed specifically for this printer, otherwise fire, electric  
shock, or damage may result.  
Do not plug the printer into an electrical outlet other than a household outlet (AC100-240V 50/60Hz),  
otherwise fire, electric shock, or damage may result.  
Do not touch the AC adapter/DC cable or the power supply plug with wet hands, otherwise electric  
shock may result.  
Do not try to disassemble, alter, or repair the AC adapter/DC cable, otherwise fire, electric shock,  
or injury may result.  
For servicing, adjustments or repairs, contact the sales representative where the printer was  
purchased.  
6
 
WARNING  
Do not spill water or drinks on the AC adapter/DC cable. In addition, do not use the AC adapter/DC  
cable in a location where it may get wet, otherwise explosion or electric shock may result.  
If the power supply plug becomes dirty (for example, if it becomes covered with dust) disconnect it  
from the electrical outlet, and then wipe it with a dry cloth. If you continue to use a dirty power supply  
plug, fire may result.  
When disconnecting the AC power cord, do not pull on the cord, otherwise fire or electric shock may  
result.  
Do not insert foreign objects into the terminals of the AC adapter/DC cable, otherwise burns or  
electric shock may result.  
Use the AC adapter/DC cable correctly and observe the following precautions, otherwise fire or  
electric shock may result.  
Do not damage the AC adapter/DC cable.  
Do not modify the AC adapter/DC cable.  
Do not twist the AC adapter/DC cable.  
Do not severely bend the AC adapter/DC cable.  
Do not pull on the AC adapter/DC cable.  
Do not place objects on the AC adapter/DC cable.  
Do not subject the AC adapter/DC cable to heat.  
Do not bind the AC adapter/DC cable.  
Do not allow the AC adapter/DC cable to be pinched.  
If the AC adapter/DC cable is damaged, request a new one from the sales representative where the  
printer was purchased.  
Keep the AC adapter/DC cable out of the reach of children, particularly infants, otherwise injury may  
result.  
Do not use the AC adapter/DC cable near microwave ovens, otherwise damage to the AC  
adapter/DC cable or printer may result.  
Do not use the AC adapter/DC cable near flames or heaters. If the covering of the AC adapter/DC  
cable cord melts, fire or electric shock may result.  
7
 
WARNING  
Before performing maintenance on the printer, such as cleaning, disconnect the AC adapter/DC  
cable from the electrical outlet, otherwise electric shock may result.  
If the printer will not be used for a long period of time, disconnect the AC adapter/DC cable from the  
printer and the electrical outlet for safety reasons.  
Do not wind the AC adapter/DC cable cable around the adapter or bend the cable, otherwise the  
cable may be damaged.  
CAUTION  
Printer  
Keep the printer and its accessories (rechargeable battery, consumables, plastic bags, labels, etc.)  
out of the reach of children, particularly infants, otherwise injury or accidents such as ingestion may  
result.  
Stop operating the printer if it leaks or becomes discolored, deformed, or otherwise defective.  
Do not operate the printer while holding only the release cover. If the cover comes off and the printer  
falls, injury may result.  
General Precautions  
Rechargeable battery  
At the time of purchase, the rechargeable battery is slightly charged so that the operation of the  
printer can be verified; however, the rechargeable battery should be fully charged with the AC  
adapter/DC cable before the printer is used.  
If the printer will not be used for a long period of time, remove the rechargeable battery from the  
printer, and then store it in a location where it is not exposed to static electricity, high humidity, or  
high temperatures (temperatures between 15 and 25 C and 40% to 60% humidity are  
recommended). In order to maintain the efficiency and life of the rechargeable battery, charge it at  
least every six months.  
The printer is powered with a rechargeable battery. If the printer can only be used for a short period  
of time, even though it is fully charged, the rechargeable battery may have reached the end of its  
service life. Replace the rechargeable battery with a new one.  
When replacing the rechargeable battery, cover the battery terminals that make contact with the  
printer with tape to prevent the terminals from shorting.  
8
 
Trademarks  
The Brother logo is a registered trademark of Brother Industries, Ltd.  
Brother is a registered trademark of Brother Industries, Ltd.  
© 2010 Brother Industries, Ltd. All rights reserved.  
Microsoft, Windows and Windows Vista are registered trademarks of Microsoft Corporation in the  
United States and other countries.  
Apple, Macintosh and Mac OS are trademarks of Apple Inc., registered in the United States and  
other countries.  
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such  
marks by Brother Industries, Ltd. under license.  
Adobe and Reader are either registered trademarks of Adobe Systems Incorporated in the United  
States and/or other countries.  
Portions of the graphics filter software are based in part on the work of the Independent JPEG  
group.  
9
Regulation  
Federal Communications Commission (FCC) Declaration of  
Conformity (For USA Only)  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two  
conditions: (1) this device may not cause harmful interference, and (2) this device must accept  
any interference received, including interference that may cause undesired operation.  
This equipment has been tested and found to comply with the limits for a Class B digital device,  
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection  
against harmful interference in a residential installation. This equipment generates, uses, and can  
radiate radio frequency energy and, if not installed and used in accordance with the instructions,  
10  
Industry Canada Compliance Statement (For Canada only)  
This Class B digital apparatus complies with Canadian ICES–003.  
Cet appareil numérique de la classe B est conforme à la norme NMB–003 du Canada.  
11  
 
LBA786001  
Printed in the USA  
 

Black Decker Coffeemaker DCM1100B User Manual
Blanco Dishwasher BID11 User Manual
Bose Universal Remote AM272394 User Manual
Broan Ventilation Hood QL1 Series User Manual
Broan Ventilation Hood QT230BL User Manual
Califone Stereo System PA IRSYS User Manual
Canon Printer BJC 55 User Manual
Carson Automobile Alarm SA 400 Classic User Manual
Chamberlain Garage Door Opener 1280 298LMC User Manual
Chromalox Electric Heater PD437 4 User Manual